发送询价
设有一个聚甲醛®塑料手柄，防止身体的热传导干扰的读数，以及一个的单向阀的顺利运作。所有活塞的双O形圈，确保零泄漏。 MP-P和MP-V已经服务超过4年，现在可以发现，超过三分之一的所有发电厂。两款车型表现在它的类的任何制造泵“。特点
聚甲醛®塑料手柄防止身体热量转移
止回阀流畅的控制操作
醪的防爆阀阀（没有针型阀）
获得的非油基润滑剂使用的所有移动部件
双O形圈活塞确保零泄漏
2年的“狡辩”保修（包括丢弃）
模型
MP-P：
MP-P+ HK-1：添加2英尺非弹力软管KIT W /配件侧端口。注：试剂盒，软管和管接头，可根据要求定制。
MP-PKT：套件包括一个黑色填充画布的情况下，橙色的线，2英尺非弹力软管，接头和亲M-4不锈钢模拟仪表2“1/2瓦特/橡胶保护套绣。
MP-P-FT：MP-的PKT再加上速度快的通用快速连接试剂盒（泵和仪表之间的快速连接。此外，还包括耦合器适用于世伟洛克管接头。
产品规格
MP-P0到100 psi（包括，并不限于一英寸的水）
连接（2个端口）1/8英寸的“不扩散核武器条约”
重量1.5磅
2英尺软管和1/4英寸接头
在美国
范围
0至28“Hg和0到施以固定100psi（7酒吧）
嵌入式排气旋钮，以防止损坏掉落
醪的防爆阀阀（没有针型阀）
所有活塞双O形圈
MP-P Pressure Calibration Pump
Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over 4 years and can now be found in over one third of all power plants. Both models "will out perform any manufactured pump in it's category".
Features
- Delrin® Plastic handle prevents body heat transfer
- Oversized check valves for smooth controlled operation
- Mash proof vent valve (No Needle Valve)
- A patented non-oil based lubricant is used on all moving parts
- Dual O-Rings on all pistons to ensure zero leakage
- 2 year "quibble free" warranty (includes dropping)
Models
- MP-P: Standalone
- MP-P + HK-1: adds a 2ft non-stretch hose kit w/ fittings for side port. Note: Kits, hoses and fittings can be customized upon request.
- MP-PKT: Kit includes a black padded canvas case embroidered in orange thread, 2ft non-stretch hose, fittings and Magnum pro M-4 stainless steel analog gauge 2" 1/2 w/ protective rubber boot.
- MP-P-FT: MP-PKT plus FasTest universal quick connect kit (for quick connect between pump and gauge. Also includes coupler for Swagelok tube fittings.
Specifications
- MP-P 0 to 100 psi (including and not limited to an inch of water)
- Connections (2 ports) 1/8 inch NPT
- Weight 1.5lbs
- 2ft hose and 1/4 inch fitting
- Made in the USA
Range
- 0 to 28"Hg and 0 to 100psi (7 Bar)
- Recessed vent knob to prevent damage from dropping
- Mash proof vent valve (No Needle Valve)
- Dual O-Rings on all pistons